Archives des Concrete - Prostationnement

How to Repair a Concrete Porch

simon — Thu, 12 Oct 2023 14:00:08 +0000

How to Repair a Concrete Porch

Your home’s stoop is one of the first things your guests see when they arrive, and it plays a crucial role in the overall aesthetics of your property. If your stoop is showing signs of deterioration, it’s time to think about renovation.

In this article, we’ll take you step-by-step through the process of renovating your concrete stoop, giving you practical tips for optimum results.

7 Steps to repair a concrete stoop

Step 1: Deep Cleaning

Before starting work, it’s essential to thoroughly clean the entire surface of the stoop. Use a garden hose or electric pressure washer to remove concrete residues, dust and even oil stains. Once cleaned, allow the surface to dry completely before moving on to the next step.

Step 2: Filling holes and cracks

To achieve a uniform surface, fill cracks and holes using a fast-setting repair mortar. Here’s how to prepare the mortar:

Mix the powder in a container to ensure even distribution of the additives.
Pour one part water to three parts powder into another container.
Use a mixer mounted on a drill to mix for about three minutes until the desired consistency is reached.
Apply mortar with a trowel, making sure to cover cracks and holes evenly.

Step 3: Apply Repair Mortar

After filling cracks and holes, apply a thin layer of mortar over the entire surface of the stoop using a trowel. Work in sections so that the mortar adheres firmly to the surface. Then add mortar to reach a thickness of about 2 inches.

Step 4: Use Quick-Setting Mortar

To protect your stoop against water infiltration, apply a finishing coat of quick-setting mortar. Follow the same steps as for repair mortar, first applying a thin layer over the entire surface, then a thicker layer. Use a square trowel for the corners of steps and edges.

Step 5: Applying the plaster

The final touch to your concrete stoop is the application of roughcast. Start at the bottom of the stoop and work your way up. Be sure not to exceed ½ inch in thickness. If imperfections persist after the first coat, you can apply a second coat after a suitable drying time for a flawless result.

Step 6: Important precautions

Two precautions are essential when renovating your concrete stoop. In case of intense heat or risk of rain, cover the surface with a cloth to prevent premature drying or excess water in the mortar. You should also avoid renovating in very cold weather, as this will make the mortar crumbly and compromise the final result.

Step 7: Opt for Epoxy

If you’re looking for a durable, aesthetically pleasing coating for your concrete stoop, epoxy is an option worth considering. It’s wear-resistant, easy to maintain, slip-resistant and aesthetically customizable.

By following these seven steps, you can breathe new life into your concrete stoop and improve the overall appearance of your property. If you’re looking for professionals to help you with this project, don’t hesitate to use our certified contractor referral service.

Repair of Concrete Steps

Although concrete steps are durable and easy to maintain, they can wear out over time. The corners and edges of stair nosings can erode with normal use, or even become more damaged when heavy objects such as boxes or carts are carried up and down the steps.

Repairing your concrete steps is a natural part of their life cycle. Cracked or chipped concrete steps can be repaired quickly and easily with a few basic materials and tools available at your local DIY store.

Step 1 – Cleaning

Start by thoroughly cleaning the steps using a pressure washer to remove dirt, debris and loose residues.

Step 2 – Crack preparation

Take a close look at the cracks. Use a hammer and chisel to widen the cracks slightly. This will allow the repair material to adhere better.

Step 3 – Applying the Repair Material

Apply a repair material specially designed for concrete steps to the cracks. Smooth the surface with a trowel so that it is level with the rest of the step.

Step 4 – Finishing

Once the repair material has been applied, use a brush or float to give the surface the desired texture.

Step 5 – Curing

Allow the repair material to harden according to the manufacturer’s instructions.

Step 6 – Sealing (Optional)

For extra protection, consider applying a concrete sealer to the steps once the repair has hardened. This will help prevent future damage.

By following these steps, you can create new concrete steps or repair existing ones, improving both the aesthetics and safety of your outdoor space.

Trust the experts for your work

While some homeowners consider carrying out the project themselves, calling in a professional guarantees uniform application and minimizes the risk of costly mistakes. Trust Prostationnement for your renovations.

The advantages of epoxy for your stoop

Epoxy staircases offer an attractive, durable alternative to traditional concrete staircases. Epoxy is a coating with many advantages:

Resistance: Epoxy is extremely resistant to wear, chemicals, moisture and even fire, making it an ideal choice for stoops.
Ease of maintenance: As a non-porous coating, epoxy is easy to clean. A simple sweep or mop is all it takes to keep it clean.
Safety: Epoxy is slip-resistant, reducing the risk of slips and falls, making it a safe choice for stoops.
Aesthetics: Available in a variety of finishes, colors and patterns, epoxy can be fully customized to match the aesthetics of your home.

To renovate your epoxy stoop, follow the steps previously mentioned for repairing concrete steps, replacing the repair material with epoxy. Be sure to follow the epoxy manufacturer’s instructions for best results.

Whether you opt for traditional concrete steps or a modern epoxy stoop, you can improve the look and functionality of your outdoor space with these repair and renovation solutions.

Don’t hesitate to contact Prostationnement for a professional analysis and treatment tailored to your specific needs. Your surface will quickly regain its original shine, saving you time and effort.

L’article How to Repair a Concrete Porch est apparu en premier sur Prostationnement.

What is a concrete sealer?

simon — Fri, 06 Oct 2023 13:44:02 +0000

What is a concrete sealer?

To keep your decorative or even plain concrete looking good for a long time, we strongly recommend sealing it with a high-quality concrete sealer. Once sealed, concrete will be protected from dirt, spills and weather, helping to prevent staining and reduce wear.

Sealing is particularly important in high-traffic commercial and industrial environments, as it will ensure that the surface can be easily maintained and will remain beautiful for a long time.

What is a concrete sealer?

A concrete sealer is a liquid solution used to protect and visually enhance concrete while increasing floor safety. It is applied to the concrete surface once it has hardened and been cleaned to form a protective layer.

There are two common types of sealant to choose from – film-forming sealants and penetrating sealants, each offering its own advantages and suitable for different applications.

Why do you need to seal your concrete floor?

The main reason for sealing concrete is to protect floors from damage such as abrasion, staining, freeze-thaw and salt attack. It’s essential to prevent liquids and chemicals from penetrating and damaging the concrete. Sealing will extend the life of the concrete, maintaining its functionality for longer.

Concrete sealer can also be used simply to embellish floors, increase gloss and improve color, especially for decorative concretes. Finally, sealers can be used to apply an anti-slip treatment to the floor, think of a wet concrete driveway or concrete pool deck.

What happens if you don’t seal the concrete?

If you don’t seal your concrete, you run the risk of encountering numerous problems. Remember that concrete is a very strong and durable material, but it remains porous. Concrete has capillaries and pores that allow dirt, mold, mildew and moisture to infiltrate.

Freeze-thaw attack is a major concern for unsealed concrete. Unsealed concrete exposed outdoors in cold climates is prone to water infiltration and ice formation. The dangerous thing to remember here is that when water freezes, it expands. This expansion can cause cracks, pits and chips, all of which will remain in the concrete when the ice melts. This freeze-thaw action is extremely damaging to concrete.

Trust the experts for your work

The different types of concrete sealers

There are two general categories of concrete sealants: surface sealants and penetrating sealants.

These categories include water-based and solvent-based sealants.

Which concrete sealants to choose?

Concrete sealants are either water-based or solvent-based, but there are a few key differences.

The purpose of a solvent in a sealer formulation is to act as a carrier for the sealer ingredients. The solvent dilutes the sealer and makes it easier to spread and penetrate the concrete when applied, leaving only the polymers on the surface when the solvent dissipates. The disadvantage of solvent-based sealants is that they are dangerous (flammable), have a strong odor and release harmful vapors into the environment. With advances in modern technology, we can now use water as a “solvent” for our concrete sealants instead of harmful chemicals.

There are many advantages to using a water-based sealer. The water itself is more environmentally friendly, but there are no flammability problems and much less odor, allowing the product to be used safely in indoor environments.

Surface sealants

Surface sealants create a protective layer on the concrete surface. They are generally applied after the concrete has been finished, hardened and cleaned. Here are some of the advantages of surface sealants:

Improved appearance: They can enhance the color and shine of concrete, making them ideal for decorative concretes.
Stain protection: They make concrete less porous, reducing the possibility of stains from spilled liquids.
Ease of maintenance: They make cleaning easier by creating a smooth surface that prevents dirt and dust from becoming embedded.
Abrasion resistance: They increase resistance to abrasion caused by foot and light vehicle traffic.

However, surface sealants can wear down over time, especially in high-traffic areas. They can also become slippery when wet, so it’s important to choose a sealer with a non-slip finish if necessary.

Penetrating sealants

Penetrating sealants are designed to penetrate the concrete surface and react chemically with the concrete components to form a waterproof gel. Here are just a few of the advantages of penetrating sealants:

Water and liquid penetration protection: They effectively repel water and liquids, making them ideal for areas prone to dampness and seepage.
Concrete breathing: They allow concrete to breathe, which means they don’t form a film on the surface or alter the appearance of the concrete.
Freeze-thaw protection: They reduce the risk of freeze-thaw cracks by preventing water from penetrating the concrete.

However, penetrating sealers generally don’t improve the appearance of concrete, and they may not offer the same stain protection as surface sealers.

Which type of concrete sealer is best?

Choosing the best type of concrete sealer depends on the specific application and your needs. Here are a few tips to help you make your decision:

If you want to improve the appearance of concrete, opt for a surface sealer. Be sure to choose a high-quality product to avoid fading and premature wear.
If protection against stains and abrasion is your main concern, a surface sealer is also a good choice.
For areas subject to moisture or infiltration, a penetrating sealer is generally preferable. It offers effective protection against water and does not alter the appearance of the concrete.
If you need specific protection, such as an anti-slip finish, be sure to choose a sealer that meets these needs.

Ultimately, it’s advisable to consult a concrete professional or seek the advice of a concrete sealer expert to make sure you choose the right product for your project.

How long do concrete sealants last?

The service life of a concrete sealer depends on a number of factors, including product quality, application conditions, level of maintenance and the amount of traffic to which the surface is exposed. In general, surface sealants can last from 1 to 5 years, while penetrating sealants can last from 5 to 10 years or more.

It’s important to follow the manufacturer’s maintenance recommendations and reapply the sealer as needed to maintain the protection of the concrete surface.

Best practices for keeping concrete floors clean

To keep your concrete floors clean and in good condition, here are some best practices to follow :

Sweep regularly to remove dirt and debris that can scratch the surface.
Use a high-pressure cleaner to remove stubborn dirt and stains.
Avoid using abrasive or corrosive chemicals that could damage the sealant.
In the event of stains, clean immediately with a mild detergent and lukewarm water.
Reapply sealant according to manufacturer’s recommendations to maintain effective protection.

Repairing and resealing a concrete surface

If your concrete surface shows signs of deterioration or if the sealant wears out, repairs and re-sealing may be necessary. Here are the general steps to follow for this process:

Cleaning: Start by thoroughly cleaning the concrete surface to remove any existing dirt, stains or sealant residues. High-pressure cleaning may be necessary.
Repair: Carry out any repairs required to correct cracks or imperfections in the concrete. You may need to fill cracks or holes with a suitable repair product.
Preparation: Prepare the surface for the type of sealer you will be using. Surface sealants often require sanding or polishing, while penetrating sealants require a clean, dry surface.
Application: Apply sealer according to manufacturer’s instructions. Be sure to work in appropriate conditions to allow proper drying and curing.
Maintenance: Follow the manufacturer’s maintenance recommendations and reapply sealant as needed to maintain protection.

It’s important to note that resealing and repairing concrete are tasks that can require special skills, and it’s often advisable to call in a professional to ensure optimum results.

Conclusion

In short, choosing the best concrete sealer depends on your specific needs and intended application. Be sure to choose a high-quality product and follow best maintenance practices to keep your concrete surfaces in good condition and protect them from the elements and daily wear and tear.

If necessary, consider calling in a professional for proper repairs and resealing.

L’article What is a concrete sealer? est apparu en premier sur Prostationnement.

Solutions to remove stains from your surfaces!

simon — Wed, 27 Sep 2023 22:46:18 +0000

Solutions to remove stains from your surfaces!

Over time, the surfaces of your home are bound to suffer damage from external aggression. Whether it’s your pavers, concrete or asphalt, it’s not uncommon for tire marks, rust, grease or mold to spread.
Most people clean with a few products recommended in stores, but these never permanently remove the marks.

The truth is, there’s no miracle solution that will work for every stain and every surface. Fat embedded in your interlocking paving stones is not treated like rust on your asphalt.
However, a quick analysis will make it easier to choose the right treatment.

Steps to choosing the right cleaning technique

1. Identify the stain material

The first step in effectively removing a stain is to identify the material from which it is made. These can include fuel, rust, motor oil, hydraulic oil, animal fat left behind by your barbecue, mold and mildew, rubber, and so on.

Each type of task requires a specific approach.

2. Determine the temperature at the time of spot creation

The temperature at the time of spot creation is an important factor. This indicates the depth to which the material has penetrated.

The more encrusted the material, the more difficult it is to clean.

3. Note the porosity of your surface

The porosity of your surface, whether asphalt, concrete, epoxy surface, inter-block paving, etc., is also a key consideration.

Porosity determines the level of encrustation in the material and the cleaning methods required.

4. Consider the environment

The environment around the spot to be treated is an essential factor. If plants are in the vicinity, if there are fragile objects nearby, or chemicals that are difficult to move, all these factors must be taken into account when choosing the cleaning method.

You also need to specify whether your surface has undergone any previous treatment or whether there are any sand joints.

The right analysis will enable you to choose the most appropriate cleaning technique for your specific situation.

Cleaning techniques for different types of stains

Superficial rust stains: Brushing the stain with a rust remover and hand brush can be effective. Repeat the process, using a small amount of product each time, and rinse thoroughly with water to avoid white marks.
Ingrained rust stains: Use hydro-sandblasting. However, this procedure must be carried out by professionals.
Tire marks: If rubber cleaners are not sufficient, a high-pressure jet with an abrasive may be necessary. However, this may not be advisable if you already have a sealer applied to the surface.
Invasion by small plants and mildew: Hand brushing with a good fungicide can be effective. If mold is deeply embedded, high-pressure cleaning may be required.

Finally, in most cases, the cleaned areas will appear cleaner than the rest of the surface, necessitating a complete cleaning of the entire surface. To avoid this tedious manual work, Prostationnement can analyze and treat stains on your concrete, asphalt, cobblestone or other surfaces. Simply call us at 1-800-417-6215.

Trust the experts for your work

Summary table of cleaning methods

Here is a summary table of cleaning methods depending on the type of stain and surface:

Type of stain	Surface	Cleaning method
Surface rust	All surfaces	Brushing with hand rust remover
Encrusted rust	All surfaces	Hydro-blasting (professional)
Tire marks	All surfaces	Rubber cleaners or high-pressure jet with abrasive (beware of sealant)
Mould and vegetation	All surfaces	Hand brushing with fungicide or high-pressure cleaning (depending on incrustation)

Stain Types and Cleaning Methods

Concrete surfaces

If you have a concrete surface, here’s how to treat some common stains:

Type of stain	Cleaning method
Grease stain	Use a concrete degreaser followed by high-pressure cleaning.
Rust stain	For superficial stains, use a rust remover with a hand brush. For stubborn stains, opt for hydro-sanding.
Engine oil stain	Use a special degreaser to remove the oil, followed by high-pressure cleaning.
Mould and Fungi	Hand brushing with a fungicide may suffice, but for serious cases, opt for high-pressure cleaning.

Uni-paved surfaces

Cleaning interlocking stone requires special care:

Type of stain	Cleaning method
Grease stain	Use a paving stone degreaser followed by high-pressure cleaning.
Rust stain	Hydro-blasting is recommended for rust stains on interlocking paving stones.
Engine oil stain	Use a suitable degreaser followed by high-pressure cleaning.
Mould and Fungi	Hand brushing with a fungicide can give good results. For more serious cases, opt for high-pressure cleaning.

Wood surfaces

Cleaning wood requires special treatment:

Type of stain	Cleaning method
Grease stain	Use a special wood degreaser followed by gentle brushing.
Rust stain	Avoid abrasive products. Use a gentle rust remover.
Engine oil stain	Apply an absorbent, such as cat litter, followed by gentle cleaning.
Mould and Fungi	Use a mild wood fungicide solution and brush gently.

Brick surfaces

Bricks also require a specific approach:

Type of stain	Cleaning method
Grease stain	Use a degreaser suitable for bricks, followed by high-pressure cleaning.
Rust stain	Avoid abrasive products. Use a mild rust remover.
Engine oil stain	Use a suitable degreaser followed by high-pressure cleaning.
Mould and Fungi	Hand brushing with a fungicide can be effective. For more serious cases, opt for high-pressure cleaning.

Conclusion

Careful analysis of the stains, the surface and the environment is essential when choosing the best cleaning method. To avoid tedious work, it’s advisable to call on professionals like Prostationnement, who can analyze and treat stains on your concrete, asphalt, paving stone, wood or brick surfaces.

Simply call us at 1-800-417-6215 for efficient, personalized service. Your home deserves to be spotless, and we’re here to help you get there.

L’article Solutions to remove stains from your surfaces! est apparu en premier sur Prostationnement.

Concrete Cleaning Guide: Techniques and Practical Advice

simon — Tue, 19 Sep 2023 13:30:32 +0000

Concrete Cleaning Guide: Techniques and Practical Advice

Concrete, with its many uses ranging from driveways to skyscrapers, is omnipresent in our urban landscape. E

And yet, despite its sturdiness, it’s not immune to soiling. If you’ve ever had to deal with stubborn stains on your driveway or patio, you know how essential it is to keep this material clean.

Let’s get to the heart of the matter and discover how to clean concrete surfaces.

Why is it important to clean your concrete surfaces regularly?

Although concrete is known for its robustness, it is not impervious to dirt. Over time, it can accumulate stains, mildew, algae or even discoloration from exposure to the elements and daily wear and tear. Regular cleaning of concrete is not just for aesthetic reasons.

Proper maintenance can also preserve the structural integrity of concrete by removing corrosive or harmful substances. What’s more, keeping it clean extends its life and minimizes the need for future repairs.

What is concrete and why is it so widely used?

Concrete is a heterogeneous mixture of water, cement and aggregates. Its versatility, durability and ability to take on many shapes make it a preferred choice for many construction projects.

Common types of soiling on concrete

Cleaning with soap and water

Let’s start with the simplest and most accessible method: cleaning with soap and water. If your concrete is slightly dirty or dusty, a simple sponge or brush dampened with soapy water can work wonders. Be sure to use a mild soap and rinse well to avoid residue.

Use of high-pressure cleaners

High-pressure cleaners are great for cleaning hard surfaces like concrete. They are particularly effective for removing stubborn stains, moss or accumulated deposits. But remember, power can damage surfaces if misused. So be sure to start with a lower pressure and increase if necessary.

Use of chemical and natural agents

There are a multitude of products on the market for cleaning concrete, ranging from chemical detergents to natural solutions such as vinegar or baking soda. Each agent has its own advantages, so be sure to read the instructions and choose the one best suited to your situation.

Steam cleaning for deep cleaning

An often underestimated technique is steam cleaning. Combined heat and pressure can penetrate deep into the pores of concrete, removing dirt without the need for chemicals. It’s a great option, especially for those looking for a more eco-friendly solution.

Trust the experts for your work

Precautions to be taken when cleaning concrete

Safety and personal protective equipment

Before getting started, make sure you’re properly equipped. Goggles, gloves and sometimes even boots may be necessary, especially if you’re working with chemicals or powerful equipment.

The importance of testing a small area first

I can’t stress this enough: always test a small hidden area before cleaning a large one! This allows you to see how the concrete reacts and avoid possible disasters.

Paying attention to run-off and the environment

Be aware of where your cleaning water goes. Chemicals can harm flora and fauna. Opt for biodegradable products whenever possible, and direct run-off away from plantings and watering holes.

How do I protect concrete after cleaning?

Using sealants and waterproofing Once you’ve worked hard to clean your concrete, protect it! Sealants can provide a protective barrier against stains, water and even UV rays.

Regular maintenance techniques A little regular cleaning can save a lot of work in the long run. Remember to sweep and wash your concrete from time to time to prevent dirt build-up.

Preventive measures to avoid future stains Prevention is better than cure, isn’t it? Place mats at the entrance to concrete areas, avoid spilling substances such as oil or wine, and act quickly in the event of a spill.

Need Concrete Cleaning Experts?

You might think that cleaning concrete is easy. After all, isn’t it just a matter of scrubbing with soap and water? Many homeowners, attempting to clean their concrete with basic equipment, find themselves disappointed.

At Prostationnement, we take a different approach. Thanks to our top-of-the-range industrial equipment, we can ensure thorough cleaning. And with our team of specially trained experts, we can handle even the toughest dirt.

Why choose Prostationnement?

Professional equipment: We use high-pressure machines specially designed for cleaning concrete.
Expert technicians: Our team is trained to handle all types of soiling, using specific products for each stain.
Customer service: We value every customer. We make sure all your questions and concerns are answered.

Our Concrete Washing Projects

L’article Concrete Cleaning Guide: Techniques and Practical Advice est apparu en premier sur Prostationnement.

Solutions for waterproofing your concrete

de_vrais_pro — Thu, 06 Apr 2023 04:09:13 +0000

Waterproofing a concrete surface

Waterproofing concrete slabs is a crucial step in extending their lifespan while preserving their natural appearance. It provides effective protection against water, oil and grease stains, as well as the damaging effects of frost and moss.

In this article, we’ll explain how to waterproof a concrete slab in three essential steps.

Step-by-step guide to waterproofing concrete

1. Clean your concrete surfaces

Before applying any waterproofing, the concrete surface must be properly prepared and cleaned.

Follow these steps:

2. Surface preparation

Clear the slab of any furniture or clutter that might interfere with the process.
Remove dust and debris with a broom or vacuum cleaner.
If moss is present, treat it with an anti-moss product.
Clean the slab thoroughly with a brush and a product such as Saint-Marc.
Rinse the surface with clean water or a high-pressure cleaner.
Leave the slab to dry for 2 to 3 days.
Test the porosity of the concrete surface

For waterproofing to be effective, the concrete slab must be sufficiently porous.

You can check this with a simple test:

3. Porosity check

Pour a little water on the concrete slab.
If the water is absorbed in less than 3 minutes, your tiles are sufficiently porous.
If water stagnates on the surface, forming a puddle, the slab is not porous enough. In this case, you will need to “open” the concrete by following these steps:
Mix 1 liter of hydrochloric acid with 4 liters of water, following the manufacturer’s safety instructions.
Pour the solution onto the slab using a watering can.
Leave on for 1 hour, then rinse thoroughly with clean water.
Leave to dry for 48 hours.
Apply waterproofing to concrete

Before applying waterproofing, be sure to take the necessary precautions, as these products are volatile and potentially hazardous to health. Here’s how it works:

4. Application of waterproofing :

Wear protective clothing, gloves, mask and goggles.
Use a sprayer for even application.
Fill the sprayer with waterproofing.
Pressurize the sprayer.
Start by spraying the waterproofing compound onto the bottom of the surface to be treated.
Spray evenly over an area of approx. 1 m², covering all tiles and joints.
Move on to the next surface, slightly overlapping the area already treated.
Follow the manufacturer’s recommendations for drying times.
Apply a second coat of waterproofing after initial drying.
Wait 24 hours before putting your garden furniture back in place and enjoying your waterproofed terrace.

By following these steps, you can effectively waterproof your concrete slabs, extending their lifespan and protecting them from the elements.

Concrete and its impermeability

Conventional concrete is not 100% waterproof. Water resistance depends on drying and curing. Fresh concrete is more sensitive to water than hardened concrete.

The use of waterproof cements is an option, but polishing and sealing concrete is often the best solution.

Use of waterproof cements

Waterproof cements can improve the water resistance of concrete, but they do not make it completely waterproof. The concrete surface remains porous, which can encourage the growth of harmful micro-organisms. For effective waterproofing, concrete should be polished and sealed.

Concrete sealing

To make concrete more water-resistant, we recommend polishing and sealing it with special products. Discover our concrete cleaning services

These products penetrate deep into the material, hardening the structure and providing a better seal. They also make cleaning easier and prevent the formation of moss, lichen and algae.

Trust the experts for your work

Concrete waterproofing classes

Concrete can be classified into different categories according to its density and compressive strength. The four main classes are :

Class 1: completely dry (suitable for living areas, archives, etc.).
Class 2: dry or slightly damp (for storage of moisture-sensitive products, cellars, etc.).
Class 3: damp (used for buildings with lesser use, such as underground parking lots).
Class 4: damp or wet (used for shelter structures).

Weak points in waterproofing

After construction, weak points may appear, such as holes for fixing shelves or other elements. These areas must be hermetically sealed to prevent moisture and infiltration.

Horizontal moisture protection

Horizontal waterproofing is essential to prevent moisture penetrating from the ground. It consists of a liquid seal applied to the wall, forming an impermeable barrier.

Conclusion

In conclusion, waterproofing concrete is essential to extend its life and preserve its appearance.

Follow these steps and consider your sealing options to ensure effective protection of your concrete slabs against water, oil and other damaging elements.

For best results, we recommend that you call on the services of professionals experienced in concrete waterproofing.

L’article Solutions for waterproofing your concrete est apparu en premier sur Prostationnement.